![]() ![]() If you are able to test with steel wool or sandpaper on a tiny out of the way spot and see if you like those results then I would suggest that. That will be your choice of how to proceed and feel free to look up videos or tips on how to patina metal. Some customers have used steel wool, sandpaper, etc to remove the coating and get down to the metal. The chemical in Jax has to react to the metal and if it can't reach the bare metal then it can't react. The copper, brass, or bronze item you are wanting to patina may be coated with a lacquer to prevent tarnish. It is always advisable to test JAX Green Patina in a small inconspicuous area to make sure that it does not adversely affect or damage the surface being treated.įor a more authentic look, first apply a JAX Darkener to the metal before applying the JAX Green Patina.ĭo NOT apply JAX Green Patina to hot metal or roofs the chemicals will simply evaporate and have little or no effect. Never reuse an empty JAX container.ĭo not mix JAX Products with any other chemicals. When you dispose of used products and containers, please do so in at an approved waste disposal facility. Contaminating the original container will seriously reduce the shelf-life of the product.Īlways use JAX Products in plastic or glass containers. Always store JAX products at room temperature, in tightly closed original containers AND in a locked, safe place. JAX products never expire, however, they can deteriorate over time if not cared for properly. Once you are happy with your finish, you may wax, oil, or lacquer the metal as a final step, although in many cases leaving the metal unprotected may be desirable. We do NOT recommend applying JAX Green Patina by dipping your metal into JAX Green Patina. Unlike the JAX Blackeners and Darkeners, the JAX Green Patina does NOT work instantaneously. Allow each coat to thoroughly air-dry (24 hours) between coats is recommended. The appearance of the film indicates that the patina has adhered to, and is reacting on the metal. Brush the patina onto the metal until a dull film appears. Use a stiff bristle brush and apply the JAX Green Patina directly to the metal. To be safe, eye protection is always recommended. Wearing gloves is highly recommended as to not introduce oils from your hands to the metal. Regardless of what you use to clean your metal, we recommend using Dawn Dishwashing Liquid as the final step before applying the JAX Green Patina. Your choice of cleaner depends on what you are trying to remove from your metal. JAX manufactures metal cleaners that are optimal for prepping your metal, but there is no one cleaner that will guarantee perfection. To ensure the best results, clean your metal of all lacquer, oil, grease and wax. Prepare and clean the surface to be treated *We do not accept returns nor issue refunds for Jax chemicals Please read and follow directions and cautions. Jax Chemicals should also be used with care by experienced crafts people. Jax Chemicals in 2 oz bottles may be shipped without hazardous shipping charges. The appearance of the dull film indicates the patina has adhered to and is reacting on the metal. To apply, either brush solution on with a bristle brush or dip entire object in solution. Metal must be clean and free of lacquer, oil, grease or wax. Produces a permanent, authentic green finish on copper, brass, and bronze. ![]()
0 Comments
Leave a Reply. |
Details
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |